亚州性性视频 Tech Store
Showing 31–45 of 66 results
Flame Sensor Module (YG1006) | Infrared Fire Detector for Arduino
-
Sensor Type: YG1006 NPN Phototransistor (High Speed).
-
Detection Range: Up to 1 meter (depending on flame size).
-
Spectrum: 760nm - 1100nm (Invisible IR light).
-
Best For: Fire Fighting Robots, Smart Kitchen Alarms, and Safety Systems.
Flexible Water Pump Hose (1 Meter) | 8mm PVC Tubing for Mini Pumps
The perfect fit for your mini water pump. This clear vinyl tubing is sized specifically to fit the "Mini Submersible Pumps" used in Arduino projects. It is flexible, non-toxic, and fits tightly so you don't need clamps.
-
Length: 1 Meter (Sold per meter)
-
Inner Diameter: 6mm (Fits pump nozzle perfectly)
-
Outer Diameter: 8mm
-
Material: Flexible PVC
-
Best For: Automatic watering systems and aquarium pumps.
Gloss Acrylic Enclosure Case for Arduino Uno R3 | Transparent Box
-
Material: High-Quality Clear Acrylic.
-
Fit: Designed specifically for Arduino Uno R3.
-
Assembly: Easy snap-together construction (Screws included).
-
Note: Please peel off the brown protective paper before assembly!
HC-SR04 Ultrasonic Sensor Module | Distance Measurement for Arduino
Give your robot eyes. The HC-SR04 uses sonar (sound waves) to measure distance, just like a bat. It is the standard sensor for obstacle avoidance robots and water level monitoring systems.
-
Range: 2cm to 400cm (4 Meters)
-
Accuracy: 3mm
-
Pins: VCC, Trig, Echo, GND
-
Best For: Obstacle avoiding cars, reverse parking sensors, and tank level detection.
HC-SR501 PIR Motion Sensor Module | Infrared Detector for Arduino
Build your own burglar alarm or automatic light. The HC-SR501 detects human and animal movement by sensing body heat. It is the standard motion sensor for Arduino security projects.
-
Range: Adjustable (3 to 7 meters)
-
Output: 3.3V Logic (High when motion detected)
-
Features: Adjustable Time Delay & Sensitivity
-
Ideal For: Automated lighting, security systems, and robotics.
High Sensitivity Vibration Sensor Module (SW-1801P) | Shock & Shake Switch
Detect even the slightest tap. Unlike standard vibration sensors that require a hard shake, the SW-1801P High Sensitivity module can detect light knocks, impacts, and vibrations. Perfect for anti-theft alarms and "Smart Wake-Up" devices.
-
Sensor Type: SW-1801P (High Sensitivity Spring).
-
Output: Digital (High/Low).
-
Adjustable: Blue Potentiometer to set sensitivity trigger.
-
Best For: Anti-Theft Alarms, Earthquake Detection, and Smart Toys.
IR Infrared Obstacle Avoidance Sensor Module | FC-51 for Arduino
-
Detection Range: 2cm - 30cm (Adjustable).
-
Output: Digital Signal (LOW when obstacle detected).
-
Compatibility: Works directly with Arduino, ESP32, and Raspberry Pi.
-
Best For: Robot Cars, Smart Trash Cans, and Proximity Alarms.
IRF520 MOSFET Driver Module (0-24V) | PWM Motor & LED Controller
-
Max Load: 24V DC / < 5A.
-
Control Voltage: 3.3V or 5V (PWM Compatible).
-
Output: Pulse Width Modulation (Speed/Dimming control).
-
Best For: LED Strips, Small DC Fans, and Solenoids.
IRLZ44N Logic Level MOSFET (N-Channel) | Arduino Compatible Transistor
Control high-power loads directly from your Arduino or ESP32. The IRLZ44N is a true logic-level MOSFET, meaning it fully turns on with 3.3 V or 5 V gate signals. Unlike the common IRFZ44N, it does not require a gate driver, making it ideal for simple and efficient 亚州成人影视 projects.
-
Type: Logic-Level N-Channel MOSFET
-
Maximum Voltage / Current: 55 V / 47 A
-
Gate (Control) Voltage: 5 V (fully compatible with Arduino and ESP32)
- Best for: PWM LED dimming, DC motor speed control, solenoids, relays, and other high-current loads.
LDR Photosensitive Sensor Module (4-Pin) | Light Detector
- Sensor Type:
Light Dependent Resistor (Photoresistor).
-
Outputs: Digital (D0) & Analog (A0).
-
Sensitivity: Adjustable via Blue Potentiometer.
- Best For: Automatic Lights, Sun Trackers, and Laser Tripwires.
LM2596 DC-DC Buck Converter Module | Adjustable Step-Down Regulator (3A)
-
Input: 3V - 40V DC.
-
Output: 1.5V - 35V DC (Adjustable).
-
Current: Max 3A.
-
Best For: Powering Arduinos from 12V batteries, Solar Projects, and LED Drivers.
LM358 Dual Op-Amp IC | Low Power Operational Amplifier (DIP-8)
The industry-standard chip for audio and signals.
-
Package: DIP-8 (Breadboard Friendly)
-
Supply Voltage: 3V to 32V
-
Best For: Pre-amplifiers, Active Filters, and Line Following Robots (Comparator).
Male to Male Jumper Wires (40pcs) | 20cm Dupont Cable for Breadboard
The essential cables for every 亚州性性视频 project. This is a peelable ribbon of 40 multi-colored wires with male pins on both ends. Perfect for connecting your Arduino Uno directly to a breadboard without soldering.
-
Quantity: 40 Wires (Peelable Ribbon)
-
Length: 20cm (Standard)
-
亚州成人免费视频: Male to Male
-
Best For: Breadboarding, Arduino 亚州成人免费视频, and testing circuits.
MAX30102 Pulse Oximeter & Heart Rate Sensor Module (SpO2) – Arduino Compatible
The MAX30102 is a high-precision integrated pulse oximetry (SpO2) and heart-rate monitor biosensor module, perfect for DIY health tracking and wearable IoT devices.
-
Sensor: MAX30102 (Upgraded from the older MAX30100)
-
Measurements: Heart Rate (BPM) & Blood Oxygen Saturation (SpO2)
-
Interface: I2C (Standard protocol)
-
Operating Voltage: 3.3V – 5V
-
Current: Ultra-low power consumption (ideal for battery wearables)
-
Application: Fitness trackers, medical monitoring projects, STEM research
MAX7219 4-in-1 Dot Matrix LED Display Module | Red Scrolling Text
Create your own digital sign board. This module combines four 8x8 LED matrices into a single display. It is pre-wired and ready to scroll text, numbers, and symbols using just 3 pins on your Arduino.
-
Resolution: 32 x 8 Pixels (Total 256 LEDs)
-
Color: Red
-
Interface: SPI (DIN, CS, CLK)
-
Best For: Digital clocks, scrolling message boards, and counters.