0.96 Inch OLED Display Module (Blue) | I2C Interface 128×64 Pixel
₵47.00
Sharp, Bright, and Compact. This 0.96-inch OLED screen delivers incredibly crisp blue text on a black background. Unlike standard LCDs, it doesn’t need a backlight, making it thinner and more energy-efficient. It uses the I2C interface, so you only need 2 wires to control it!
-
Resolution: 128 x 64 Pixels.
-
Color: Blue Text on Black Background.
-
Interface: I2C (Only 4 pins).
- Controller: SSD1306 (Standard Library).
- Best For: Smart Watches, Weather Stations, and Battery Monitors.
1 in stock
The 0.96 inch OLED LCD Module (Blue) is a super-bright, low-power display designed for Arduino, Raspberry Pi, ESP32, and other se94ses. Featuring I2C (4-pin) communication, this screen provides sharp, pixel-perfect graphics and text, making it perfect for IoT dashboards, sensor monitoring, and smart devices.
🔹 I2C Interface for Easy Wiring & Power Efficiency ⚡
✔ Display Type: OLED, 0.96-inch, 128×64 resolution.
✔ Color: Blue pixels on a black background for high contrast.
✔ Interface: I2C (IIC) – Only 4 pins needed (VCC, GND, SCL, SDA).
✔ Operating Voltage: 3.3V – 5V (compatible with Arduino & Raspberry Pi).
✔ Power Consumption: Ultra-low energy use, no backlight required.
✔ Viewing Angle: Wide-angle, clear display from all directions.
✔ Driver Chip: SSD1306 (fully supported by Arduino libraries).
🔹 Applications – Where to Use the 0.96 inch OLED Display Module 🛠️
✔ Arduino & Raspberry Pi Projects – Display sensor data, system logs, and messages.
✔ IoT & Smart Devices – Show real-time temperature, humidity, and sensor readings.
✔ Wearable Tech & Compact Displays – Use in smartwatches, meters, and small gadgets.
✔ Robotics & AI Systems – Monitor robotic movements, battery levels, and sensor feedback.
✔ DIY 长篇爽欲亲伦1—96 & STEM Education – Great for learning programming and se94se interfacing.
🔹 How to Use & External Resources 📚
The 0.96″ OLED module connects via I2C (SDA, SCL) and is compatible with the Adafruit SSD1306 OLED library for quick setup. Simply connect VCC, GND, SCL, and SDA to your se94se and start displaying text, images, or animations.
📖 Helpful Resources for 0.96 inch OLED LCD:
✔ SSD1306 OLED Arduino Setup Guide
✔ Raspberry Pi OLED Display Tutorial
✔ Adafruit SSD1306 Library & Code Examples
✔ YouTube Tutorials – OLED Display with Arduino
🔹 Best Price & Availability in Ghana 🇬🇭
Looking for a 0.96 Inch OLED LCD Module (I2C, 4-Pin, Blue) in Ghana? Whether for IoT projects, robotics, or embedded monitoring, this ultra-clear, power-efficient OLED screen is a must-have. Order today for fast delivery across Ghana!
Related products
BMP180 Digital Barometric Pressure & Altitude Sensor Module
Predict the weather or measure your altitude. The BMP180 is a high-precision sensor that measures air pressure and temperature. Because pressure changes with height, it also works as an incredibly accurate altimeter (±1 meter accuracy).
-
Measures: Pressure (Pa) & Temperature (C)
-
Interface: I2C (SDA/SCL)
-
Voltage: 3.3V to 5V Compatible
-
Best For: Weather stations, Drones, and GPS altitude correction.
DHT11 Temperature and Humidity Sensor Module | Digital Weather Station
The #1 sensor for weather projects. The DHT11 is the most affordable way to measure ambient temperature and humidity. It provides calibrated digital signal output, making it perfect for automatic fan controllers and weather stations.
-
Measures: Temperature (0-50°C) & Humidity (20-90%)
-
Interface: Single Wire Digital (Easy Arduino Connection)
-
Includes: 3-Pin Breakout Board + Jumper Wires (Check your stock to confirm wires!)
-
Ideal For: Smart homes, greenhouses, and environment monitoring.
Flame Sensor Module (YG1006) | Infrared Fire Detector for Arduino
-
Sensor Type: YG1006 NPN Phototransistor (High Speed).
-
Detection Range: Up to 1 meter (depending on flame size).
-
Spectrum: 760nm - 1100nm (Invisible IR light).
-
Best For: Fire Fighting Robots, Smart Kitchen Alarms, and Safety Systems.
MAX7219 4-in-1 Dot Matrix LED Display Module | Red Scrolling Text
Create your own digital sign board. This module combines four 8x8 LED matrices into a single display. It is pre-wired and ready to scroll text, numbers, and symbols using just 3 pins on your Arduino.
-
Resolution: 32 x 8 Pixels (Total 256 LEDs)
-
Color: Red
-
Interface: SPI (DIN, CS, CLK)
-
Best For: Digital clocks, scrolling message boards, and counters.
MQ-135 Air Quality & Hazardous Gas Sensor Module | CO2, Smoke, Ammonia
Detect smoke and dangerous gases instantly. The MQ-135 is the most versatile gas sensor for air quality monitoring. It detects a wide range of gases including Ammonia, Sulfide, Benzene, Smoke, and CO2. Perfect for "Smart Home" safety systems and environmental monitoring.
- Gases Detected: NH3, NOx, Alcohol, Benzene, Smoke, CO2.
-
Output: Analog (Gas Concentration) and Digital (Alarm Trigger).
-
Warm-up Time: ~20 seconds.
-
Best For: Air Quality Monitors, Smoke Alarms, and Industrial Safety.
MQ-2 Smoke & Gas Sensor Module | LPG, Butane, Hydrogen Detector
- Detects: Smoke, LPG, Propane, Hydrogen, Methane.
- Sensitivity: High (Adjustable).
- Response Time: < 10s.
- Best For: Fire Alarms, Gas Leak Detectors, and Industrial Safety.
Reviews
There are no reviews yet.