DS18B20 Waterproof Temperature Sensor Probe | Stainless Steel Digital Thermometer
Original price was: ₵40.00.₵38.00
Measure liquid temperature with digital precision. This is the waterproof version of the famous DS18B20 sensor.
-
Range: -55°C to +125°C
-
Interface: 1-Wire Digital (Requires only 1 pin)
-
Cable Length: 1 Meter
-
Best For: Aquariums, boilers, soil temperature, and cold chain monitoring.
The DS18B20 Waterproof Temperature Probe is a high-precision digital sensor designed for accurate temperature measurement in liquids, air, and harsh environments. Featuring a fully waterproof stainless steel casing, this probe is ideal for Arduino, Raspberry Pi, ESP8266, and industrial IoT applications.
🔹 One-Wire Communication for Easy Integration & Multiple Sensors ⚡
✔ Temperature Range: -55°C to +125°C (±0.5°C accuracy between -10°C and +85°C).
✔ Communication Protocol: One-Wire (Supports multiple sensors on a single data line).
✔ Waterproof Stainless Steel Probe: Ideal for wet & outdoor environments.
✔ Operating Voltage: 3.0V – 5.5V (Compatible with Arduino & Raspberry Pi).
✔ Cable Length: 1m, 2m, or more (varies by model).
✔ Durability: Resistant to rust, corrosion, and harsh environmental conditions.
🔹 Applications – Where to Use the DS18B20 Waterproof Sensor 🛠️
✔ Liquid Temperature Monitoring – Measure water, oil, and chemical temperatures.
✔ Aquarium & Hydroponics Systems – Monitor fish tanks, ponds, and plant systems.
✔ Smart Home & IoT Projects – Automate temperature control in smart environments.
✔ Weather Stations & Outdoor Monitoring – Use in environmental sensing applications.
✔ Industrial & Lab Equipment – Measure accurate temperatures in harsh conditions.
🔹 How to Use & External Resources 📚
The DS18B20 sensor communicates via One-Wire protocol, allowing multiple sensors to run on a single data pin. It works with Arduino, Raspberry Pi, ESP32, and STM32 and requires a 4.7kΩ pull-up resistor for stable operation.
📖 Helpful Resources for DS18B20 Waterproof Temperature Probe:
✔ DS18B20 Datasheet & Pinout
✔ Arduino Guide for DS18B20
✔ Raspberry Pi DS18B20 Temperature Sensor Setup
✔ YouTube Tutorials – DS18B20 Sensor with Arduino & Raspberry Pi
🔹 Best Price & Availability in Ghana 🇬🇭
Looking for a DS18B20 Waterproof Temperature Probe in Ghana? Whether for liquid temperature monitoring, IoT automation, or weather stations, this high-accuracy, stainless steel sensor is a must-have. Order today for fast delivery across Ghana!
Related products
433MHz RF Transmitter & Receiver Kit | Wireless Module for Arduino
Cut the cord. Go wireless. This kit includes one Transmitter and one Receiver. It is the simplest and most affordable way to send data wirelessly between two Arduinos up to 100 meters (with antenna).
-
Frequency: 433MHz
-
Includes: 1x Transmitter (Square), 1x Receiver (Rectangle)
-
Modulation: ASK (Amplitude Shift Keying)
-
Best For: Remote control cars, weather stations, and wireless switches.
BMP180 Digital Barometric Pressure & Altitude Sensor Module
Predict the weather or measure your altitude. The BMP180 is a high-precision sensor that measures air pressure and temperature. Because pressure changes with height, it also works as an incredibly accurate altimeter (±1 meter accuracy).
-
Measures: Pressure (Pa) & Temperature (C)
-
Interface:
I2C (SDA/SCL) -
Voltage: 3.3V to 5V Compatible
-
Best For: Weather stations, Drones, and GPS altitude correction.
DHT11 Temperature and Humidity Sensor Module | Digital Weather Station
The #1 sensor for weather projects. The DHT11 is the most affordable way to measure ambient temperature and humidity. It provides calibrated digital signal output, making it perfect for automatic fan controllers and weather stations.
-
Measures: Temperature (0-50°C) & Humidity (20-90%)
-
Interface: Single Wire Digital (Easy Arduino Connection)
-
Includes: 3-Pin Breakout Board + Jumper Wires (Check your stock to confirm wires!)
-
Ideal For: Smart homes, greenhouses, and environment monitoring.
High Sensitivity Vibration Sensor Module (SW-1801P) | Shock & Shake Switch
Detect even the slightest tap. Unlike standard vibration sensors that require a hard shake, the SW-1801P High Sensitivity module can detect light knocks, impacts, and vibrations. Perfect for anti-theft alarms and "Smart Wake-Up" devices.
-
Sensor Type: SW-1801P (High Sensitivity Spring).
-
Output: Digital (High/Low).
-
Adjustable: Blue Potentiometer to set sensitivity trigger.
-
Best For: Anti-Theft Alarms, Earthquake Detection, and Smart Toys.
IR Infrared Obstacle Avoidance Sensor Module | FC-51 for Arduino
-
Detection Range: 2cm - 30cm (Adjustable).
-
Output: Digital Signal (LOW when obstacle detected).
-
Compatibility: Works directly with Arduino, ESP32, and Raspberry Pi.
-
Best For: Robot Cars, Smart Trash Cans, and Proximity Alarms.
LDR Photosensitive Sensor Module (4-Pin) | Light Detector
- Sensor Type: Light Dependent Resistor (Photoresistor).
-
Outputs: Digital (D0) & Analog (A0).
-
Sensitivity:
Adjustable via Blue Potentiometer. - Best For: Automatic Lights, Sun Trackers, and Laser Tripwires.
MQ-3 Alcohol Sensor Module | Breathalyzer & Ethanol Detector
-
Detects: Alcohol, Ethanol, Benzine.
-
Sensitivity: Adjustable via Blue Potentiometer.
-
Warm-up: Heater requires ~20 seconds.
-
Best For: Breathalyzers, Drunk Driving Alarms, and Industrial Monitoring.
Sound Sensor Module (Microphone) | Clap Switch & Alarm Detector
Turn on lights with a clap! This microphone module detects sound waves and converts them into a digital signal for your Arduino. It is the core component for "Clap Switch" projects and noise-activated alarms.
-
Sensitivity: Adjustable via Blue Potentiometer.
-
Outputs: Digital (Gate) and Analog (Waveform).
-
Microphone: High-Sensitivity Condenser Mic.
-
Best For: Clap Switches, Baby Monitors, and Noise Alarms.
Reviews
There are no reviews yet.