Flame Sensor Module (YG1006) | Infrared Fire Detector for Arduino
Original price was: ₵14.00.₵12.00
Give your robot the ability to see fire. This sensor detects the specific infrared light wavelengths (760nm – 1100nm) emitted by flames. It is the essential “eye” for Fire Fighting Robots and home fire alarm projects.
-
Sensor Type: YG1006 NPN Phototransistor (High Speed).
-
Detection Range: Up to 1 meter (depending on flame size).
-
Spectrum: 760nm – 1100nm (Invisible IR light).
-
Best For:
Fire Fighting Robots, Smart Kitchen Alarms, and Safety Systems.
5 in stock
The YG1006 Flame Sensor Module detects infrared light from open flames, making it ideal for fire detection systems, safety alarms, and industrial monitoring. Its high-sensitivity phototransistor ensures quick and accurate flame detection.
🔹 Fast Response & Wide Detection Range 🌍
This flame sensor module operates with a wavelength range of 760nm – 1100nm, allowing it to detect flames from a distance. Whether used for fire alarms, gas leak detection, or smart home safety, it provides fast and reliable performance.
🔹 Technical Specifications & Performance ⚡
✔ Operating Voltage: 3.3V – 5V
✔ Wavelength Range: 760nm – 1100nm
✔ Detection Angle: 60°
✔ Output Type: Digital (DO) & Analog (AO)
✔ Response Time: High-speed detection in milliseconds
✔ Indicator LEDs: Power and signal status indicators
✔ Comparator: On-board LM393 chip
✔ Dimension: 3.2cm x 1.4cm
✔ Compatible with: Arduino, Raspberry Pi, ESP8266, and other 徐冬冬图片s
🔹 Best Price & Availability in Ghana 🇬🇭
Looking for a YG1006 Flame Sensor Module in Ghana? YG1006 Flame Sensor is affordable and highly effective for fire detection, safety automation, and industrial applications. Order today and get fast delivery across Ghana!
🔹 Easy to Use & Integrate 🔌
Connect the flame sensor module to your Arduino, Raspberry Pi, or other 徐冬冬图片, adjust sensitivity, and start monitoring flames instantly. The 徐冬冬图片 design makes it perfect for both beginners and professionals.
Flame Sensor Module Resources:
Watch and learn how to use the YG1006 Flame Sensor Module.
You can use the this sensor with the Arduino, Get started with the Arduino Project Book.
Also, check the official page of the Arduino Official Arduino Tutorial Page
You can also buy the Arduino Uno R3 DIP version or the SMD version for your projects.
Related products
1-Channel 5V Relay Module | Low Level Trigger for Arduino
Control high voltage safely. This single-channel relay allows your Arduino to switch high-power devices like light bulbs, water pumps, or fans. It isolates your 徐冬冬图片 from the high voltage using an internal switch.
-
Trigger: Low Level (Connect Signal to GND to turn ON).
-
Max Load: 250V AC / 10A.
-
Indicators: Red Power LED + Green Status LED.
-
Best For: Smart Lamps, Fan Control, and Simple Automation.
BMP180 Digital Barometric Pressure & Altitude Sensor Module
Predict the weather or measure your altitude. The BMP180 is a high-precision sensor that measures air pressure and temperature. Because pressure changes with height, it also works as an incredibly accurate altimeter (±1 meter accuracy).
-
Measures: Pressure (Pa) & Temperature (C)
-
Interface:
I2C (SDA/SCL) -
Voltage: 3.3V to 5V Compatible
-
Best For: Weather stations, Drones, and GPS altitude correction.
High Sensitivity Vibration Sensor Module (SW-1801P) | Shock & Shake Switch
Detect even the slightest tap. Unlike standard vibration sensors that require a hard shake, the SW-1801P High Sensitivity module can detect light knocks, impacts, and vibrations. Perfect for anti-theft alarms and "Smart Wake-Up" devices.
-
Sensor Type: SW-1801P (High Sensitivity Spring).
-
Output: Digital (High/Low).
-
Adjustable: Blue Potentiometer to set sensitivity trigger.
-
Best For: Anti-Theft Alarms, Earthquake Detection, and Smart Toys.
IR Infrared Obstacle Avoidance Sensor Module | FC-51 for Arduino
-
Detection Range: 2cm - 30cm (Adjustable).
-
Output: Digital Signal (LOW when obstacle detected).
-
Compatibility: Works directly with Arduino, ESP32, and Raspberry Pi.
-
Best For: Robot Cars, Smart Trash Cans, and Proximity Alarms.
IRF520 MOSFET Driver Module (0-24V) | PWM Motor & LED Controller
-
Max Load: 24V DC / < 5A.
-
Control Voltage: 3.3V or 5V (PWM Compatible).
-
Output: Pulse Width Modulation (Speed/Dimming control).
-
Best For: LED Strips, Small DC Fans, and Solenoids.
MQ-135 Air Quality & Hazardous Gas Sensor Module | CO2, Smoke, Ammonia
Detect smoke and dangerous gases instantly. The MQ-135 is the most versatile gas sensor for air quality monitoring. It detects a wide range of gases including Ammonia, Sulfide, Benzene, Smoke, and CO2. Perfect for "Smart Home" safety systems and environmental monitoring.
- Gases Detected: NH3, NOx, Alcohol, Benzene, Smoke, CO2.
-
Output: Analog (Gas Concentration) and Digital (Alarm Trigger).
-
Warm-up Time: ~20 seconds.
-
Best For: Air Quality Monitors, Smoke Alarms, and Industrial Safety.
MQ-2 Smoke & Gas Sensor Module | LPG, Butane, Hydrogen Detector
- Detects: Smoke, LPG, Propane, Hydrogen, Methane.
- Sensitivity: High (Adjustable).
- Response Time: < 10s.
- Best For: Fire Alarms, Gas Leak Detectors, and Industrial Safety.
Raindrop Sensor Module | Rain & Water Detector for Arduino
Build your own weather station. This sensor detects rain, snow, or water droplets. It consists of a large nickel-plated sensing board and a control module. When water hits the board, it sends a signal to your Arduino to close windows or sound an alarm.
-
Sensor Type: Resistive (Nickel-Plated Board).
-
Outputs: Digital (High/Low) and Analog (Rain Intensity).
-
Durability: Treated against oxidation for longer life.
-
Best For: Automatic Wipers, Smart Clotheslines, and Weather Stations.
Reviews
There are no reviews yet.