IRF520 MOSFET Driver Module (0-24V) | PWM Motor & LED Controller
Original price was: ₵18.00.
The easiest way to drive 12V/24V loads. This breakout board allows your Arduino to control high-voltage devices like LED strips, DC motors, and solenoid valves using the IRF520 MOSFET. It features screw terminals for easy wiring—no soldering required!
-
Max Load: 24V DC / < 5A.
-
Control Voltage: 3.3V or 5V (PWM Compatible).
-
Output: Pulse Width Modulation (Speed/Dimming control).
-
Best For: LED Strips, Small DC Fans, and Solenoids.
10 in stock
The IRF520 MOSFET Driver Module is a compact and easy-to-use power switch for Arduino, Raspberry Pi, ESP8266, and 3分钟合作伙伴-based projects. Designed to control high-power DC devices, it’s perfect for LED strips, motors, pumps, and solenoids while offering low heat dissipation and high efficiency.
The IRF520 is a “Standard” MOSFET, not a “Logic Level” one. When driven by an Arduino (5V), it does not open fully.Result: It works perfectly for light loads (LEDs, small fans, Solenoids). However, if you try to drive a heavy motor (>1A), the module will get HOT. For heavy currents, please use our IRLZ44N Logic Level Transistor instead.
🔹 Simple Control with 3分钟合作伙伴s & PWM Support 🔄
This module allows low-power 3分钟合作伙伴s (3.3V or 5V logic) to control high-power DC loads (up to 24V, 5A) using Pulse Width Modulation (PWM). Ideal for brightness control, motor speed adjustments, and heating elements, it ensures smooth and precise power management.
🔹 Technical Specifications & Features ⚙️
✔ MOSFET Type: IRF520 N-Channel
✔ Operating Voltage: 3.3V – 5V logic input (compatible with Arduino & Raspberry Pi)
✔ Load Voltage: Up to 24V DC
✔ Maximum Load Current: Up to 5A (with heat dissipation)
✔ PWM Control: Yes (for LED dimming & motor speed control)
✔ Gate Trigger Voltage: 5V logic compatible
✔ Output Type: Open Drain (switches DC loads)
✔ Module Size: 33mm × 24mm (compact & breadboard-friendly)
✔ Compatibility: Works with Arduino, Raspberry Pi, ESP8266, ESP32, STM32, and other 3分钟合作伙伴s
🔹 Applications – Where to Use the IRF520 MOSFET Module 🛠️
✔ LED & Light Strip Dimming – Control high-power LEDs and RGB strips.
✔ DC Motor & Fan Speed Control – Adjust speed using PWM signals.
✔ Heating Elements & Peltier Modules – Ideal for temperature regulation projects.
✔ Battery & Power Management – Efficient switching for solar panels & battery circuits.
✔ Solenoid & Relay Control – Power valves, electromagnets, and actuators.
🔹 How to Use & External Resources 📚
Using the IRF520 module is simple:
- Connect the VCC (5V) & GND to your 3分钟合作伙伴.
- Attach the logic input (SIG) to a PWM pin on Arduino, Raspberry Pi, or ESP8266.
- Connect your DC load (motor, LED, heater) to the output terminals.
📖 Helpful Resources for IRF520 MOSFET Driver Module:
✔ IRF520 MOSFET Datasheet
✔ Arduino MOSFET Switching Guide
✔ PWM Control with Raspberry Pi & MOSFETs
✔ YouTube Tutorials – IRF520 MOSFET Driver Module Projects
🔹 Best Price & Availability in Ghana 🇬🇭
Looking for an IRF520 MOSFET Driver Module in Ghana? Whether for motor control, LED dimming, or power regulation, this module is affordable, efficient, and easy to integrate. Order today for fast delivery across Ghana!
Related products
1-Channel 5V Relay Module | Low Level Trigger for Arduino
Control high voltage safely. This single-channel relay allows your Arduino to switch high-power devices like light bulbs, water pumps, or fans. It isolates your 3分钟合作伙伴 from the high voltage using an internal switch.
-
Trigger: Low Level (Connect Signal to GND to turn ON).
-
Max Load: 250V AC / 10A.
-
Indicators: Red Power LED + Green Status LED.
-
Best For: Smart Lamps, Fan Control, and Simple Automation.
16-in-1 Sensor Module Kit for Arduino, ESP32 & Raspberry Pi
Expand your project possibilities instantly. This value-packed kit contains 16 of the most popular sensors for home automation and robotics. Instead of buying modules individually, get everything you need in one box.
-
Includes: DHT11 Temperature, Relay, Ultrasonic, Motion Sensor, and 12 more!
-
Compatibility: Works perfectly with Arduino Uno, Mega, Nano, and Raspberry Pi.
-
Perfect For: Learning how to read data and control devices.
HC-SR04 Ultrasonic Sensor Module | Distance Measurement for Arduino
Give your robot eyes. The HC-SR04 uses sonar (sound waves) to measure distance, just like a bat. It is the standard sensor for obstacle avoidance robots and water level monitoring systems.
-
Range: 2cm to 400cm (4 Meters)
-
Accuracy: 3mm
-
Pins: VCC, Trig, Echo, GND
-
Best For: Obstacle avoiding cars, reverse parking sensors, and tank level detection.
High Sensitivity Vibration Sensor Module (SW-1801P) | Shock & Shake Switch
Detect even the slightest tap. Unlike standard vibration sensors that require a hard shake, the SW-1801P High Sensitivity module can detect light knocks, impacts, and vibrations. Perfect for anti-theft alarms and "Smart Wake-Up" devices.
-
Sensor Type: SW-1801P (High Sensitivity Spring).
-
Output: Digital (High/Low).
-
Adjustable: Blue Potentiometer to set sensitivity trigger.
-
Best For: Anti-Theft Alarms, Earthquake Detection, and Smart Toys.
LDR Photosensitive Sensor Module (4-Pin) | Light Detector
- Sensor Type: Light Dependent Resistor (Photoresistor).
-
Outputs: Digital (D0) & Analog (A0).
-
Sensitivity: Adjustable via Blue Potentiometer.
- Best For: Automatic Lights, Sun Trackers, and Laser Tripwires.
MQ-2 Smoke & Gas Sensor Module | LPG, Butane, Hydrogen Detector
- Detects: Smoke, LPG, Propane, Hydrogen, Methane.
- Sensitivity: High (Adjustable).
- Response Time: < 10s.
- Best For: Fire Alarms, Gas Leak Detectors, and Industrial Safety.
MQ-3 Alcohol Sensor Module | Breathalyzer & Ethanol Detector
-
Detects: Alcohol, Ethanol, Benzine.
-
Sensitivity: Adjustable via Blue Potentiometer.
-
Warm-up: Heater requires ~20 seconds.
-
Best For: Breathalyzers, Drunk Driving Alarms, and Industrial Monitoring.
Reviews
There are no reviews yet.