NEO-6M GPS Module V2 with Ceramic Antenna | Flight Controller & Tracker
₵85.00
Add Satellite Navigation to your project. This high-precision GPS module allows your Arduino, ESP32, or Drone to know its exact location, speed, and time. It comes with a detachable ceramic antenna and a built-in backup battery for fast “Hot Starts.”
-
Chipset: U-Blox NEO-6M.
-
Antenna: High-gain Active Ceramic Antenna (Included).
-
Data Retention: EEPROM + Battery (Saves configuration).
-
Best For: Drone Flight Controllers, Vehicle Trackers, and Speedometers.
2 in stock
The NEO-6M V2 GPS Module with EEPROM is a high-performance GPS receiver designed for precise location tracking, navigation, and real-time positioning. Equipped with an EEPROM for data retention, this module delivers fast satellite acquisition and stable performance, making it perfect for Arduino, Raspberry Pi, ESP32, drones, and IoT applications.
🔹 Built-in EEPROM & External Antenna for Reliable GPS Reception ⚡
✔ GPS Chipset: u-blox NEO-6M (High-sensitivity GNSS receiver).
✔ Operating Voltage: 3.3V – 5V (Compatible with Arduino & Raspberry Pi).
✔ Built-in EEPROM: Stores configuration data for quick boot-up.
✔ Baud Rate: Default 9600bps (adjustable).
✔ Antenna Type: External ceramic active antenna (for improved signal strength).
✔ Backup Battery (RTC): Keeps GPS settings for faster startup.
✔ Interface: UART (TX/RX, supports NMEA protocol output).
🔹 Applications – Where to Use the NEO-6M GPS Module 🛠️
✔ GPS Navigation & Tracking – Use in vehicles, boats, and drones for real-time location.
✔ IoT & Smart Devices – Integrate GPS with IoT projects for geofencing & asset tracking.
✔ Outdoor Robotics & Automation – Enable GPS-based autonomous navigation.
✔ Weather Stations & Environmental Monitoring – Collect geo-referenced data.
✔ Personal & Wildlife Tracking – Build GPS loggers for research & security.
🔹 How to Use & External Resources 📚
The NEO-6M V2 GPS Module connects easily via UART (TX/RX) to Arduino, Raspberry Pi, and ESP32. It outputs NMEA sentences containing latitude, longitude, altitude, speed, and time data.
📖 NEO-6M v2 GPS module with EEPROM Resources:
✔ Arduino GPS Integration With NEO-6M
✔ Raspberry Pi GPS Tracking with NEO-6M Setup
✔ YouTube Tutorials – NEO-6M GPS Module with Arduino
🔹 Best Price & Availability in Ghana 🇬🇭
Looking for a NEO-6M V2 GPS Module with EEPROM in Ghana? Whether for navigation, asset tracking, or IoT geolocation, this high-precision GPS module is an essential tool. Order today for fast delivery across Ghana!
Related products
DS18B20 Waterproof Temperature Sensor Probe | Stainless Steel Digital Thermometer
Measure liquid temperature with digital precision. This is the waterproof version of the famous DS18B20 sensor. Encased in a stainless steel tube, it is perfect for measuring water, soil, or air temperature in harsh environments.
-
Range: -55°C to +125°C
-
Interface: 1-Wire Digital (Requires only 1 pin)
-
Cable Length: 1 Meter
-
Best For: Aquariums, boilers, soil temperature, and cold chain monitoring.
DS3231 RTC Real-Time Clock Module
The DS3231 is a highly accurate I2C real-time clock (RTC) with an integrated temperature-compensated crystal oscillator (TCXO).
-
Chip: Maxim DS3231 (High Precision)
-
Memory: Built-in AT24C32 32K I2C EEPROM
-
Voltage: 3.3V – 5.5V DC
-
Interface: I2C (SCL, SDA)
-
Battery Backup: Holds time when power is off (Coin cell slot included)
-
Accuracy: Much higher than the standard DS1307
High Sensitivity Vibration Sensor Module (SW-1801P) | Shock & Shake Switch
Detect even the slightest tap. Unlike standard vibration sensors that require a hard shake, the SW-1801P High Sensitivity module can detect light knocks, impacts, and vibrations. Perfect for anti-theft alarms and "Smart Wake-Up" devices.
-
Sensor Type: SW-1801P (High Sensitivity Spring).
-
Output: Digital (High/Low).
-
Adjustable: Blue Potentiometer to set sensitivity trigger.
-
Best For: Anti-Theft Alarms, Earthquake Detection, and Smart Toys.
LDR Photosensitive Sensor Module (4-Pin) | Light Detector
- Sensor Type: Light Dependent Resistor (Photoresistor).
-
Outputs: Digital (D0) & Analog (A0).
-
Sensitivity: Adjustable via Blue Potentiometer.
- Best For: Automatic Lights, Sun Trackers, and Laser Tripwires.
MQ-135 Air Quality & Hazardous Gas Sensor Module | CO2, Smoke, Ammonia
Detect smoke and dangerous gases instantly. The MQ-135 is the most versatile gas sensor for air quality monitoring. It detects a wide range of gases including Ammonia, Sulfide, Benzene, Smoke, and CO2. Perfect for "Smart Home" safety systems and environmental monitoring.
- Gases Detected: NH3, NOx, Alcohol, Benzene, Smoke, CO2.
-
Output: Analog (Gas Concentration) and Digital (Alarm Trigger).
-
Warm-up Time: ~20 seconds.
-
Best For: Air Quality Monitors, Smoke Alarms, and Industrial Safety.
MQ-2 Smoke & Gas Sensor Module | LPG, Butane, Hydrogen Detector
- Detects: Smoke, LPG, Propane, Hydrogen, Methane.
- Sensitivity: High (Adjustable).
- Response Time: < 10s.
- Best For: Fire Alarms, Gas Leak Detectors, and Industrial Safety.
SW-420 Vibration Sensor Module | Adjustable Impact & Shake Switch
- Sensor Type: SW-420 (Normally Closed).
- Output: Digital (High/Low).
- Sensitivity: Adjustable via Blue Potentiometer.
- Best For: Anti-Theft Alarms, Smart Cars, and Impact Detection.
Reviews
There are no reviews yet.